SMOOTH RIDE

UNIQUE ARRANGEMENT OF RUBBER CORDS AND STEEL TORSION ARM CREATE A SMOOTH QUITE RIDE WHEN COMPARED TO TRADITIONAL SPRUNG AXLES.

LOWER MAINTENANCE

EXCEPT FOR PERIODIC INSPECTION OF FASTENERS, NO OTHER SUSPENSION MAINTENANCE IS REQUIRED.

5 YEAR WARRANTY

LIMITED 5 YEAR ON ROAD WARRANTY.

INDEPENDENT SUSPENSION

TORSION ARMS OPERATE INDEPENDENTLY TO EACH OTHER CREATING INDEPENDENT WHEEL SUSPENSION.

Standard Torflex Capacities

Torflexsingle axletandem axle
No. 8270 kg-495 kg440 kg-820 kg
No. 9450 kg-990 kg740 kg-1640 kg
No. 101270 kg-1590 kg2110 kg-2650 kg
No. 112160 kg-2700 kg3600 kg-4500 kg
No. 122540 kg-3180 kg4240 kg-5300 kg
No. 133620 kg6000 kg

Standard Torflex dimensions

Torflexbracket face to face
No. 978” [1982mm]91” [2312mm]
No. 1078” [1982mm]91” [2312mm]
No. 1174.5” [1893mm]89.5” [2274mm]
No. 1274.5” [1893mm89.5” [2274mm]
No. 1374.5” [1893mm]89.5” [2274mm]

Variations in Trail Angle

22UT – 22 Degree up trail
10UT – 10 Degree up trail
Zero – Zero Degree trail
10DT – 10 Degree down trail
22DT – 22 Degree down trail
32DT – 32 Degree down trail
45DT – 45 Degree down trail

Popular RV Torflex specs

Torflexbracket face to faceTrail AngleSingle CapacityTandem Capacity
No. 1161.6” [1565mm]76.6” [1946mm]45DT1455 kg-1818 kg2424 kg-3030 kg
No. 1161.6” [1565mm]76.6” [1946mm]45DT1818 kg-2273 kg3030 kg-3788 kg
No. 1161.6” [1565mm]76.6” [1946mm]45DT2182 kg-2727 kg3636 kg-4545 kg

Torflex Application specs

Torflex No.8

TRAIL DEG.NO LOADFULL LOADSHOCK LOAD
HLHLHL
45DT3.842.832.543.701.793.92
32DT3.133.391.673.950.894.00
22DT2.543.70 1.014.000.233.92
10DT1.703.940.143.91-0.603.66
ZERO1.014.00-0.523.70-1.213.33
10UT0.323.94-1.143.37-1.762.89
22UT-0.523.70-1.822.83-2.322.22

NB: Positive numbers in the H column indicate the spindle is BELOW the top of the bracket. Conversely, negative numbers are ABOVE the top of the bracket.

*ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.
**ALLOW 3” BUMP CLEARANCE FROM FULL LOAD

Full Load Dimensions
Dimensions are for low profile, top mount only. Side mount is 18” higher. Allow 3” bump clearance from full load

No. 8 Bracket Dimensions

ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.

No. 8 Half Unit Bracket

ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.

Torflex No.9

TRAIL DEG.NO LOADFULL LOADSHOCK LOAD
HLHLHL
45DT5.464.423.525.542.395.88
32DT4.405.092.215.921.046.00
22DT3.525.541.226.000.055.88
10DT2.265.91-0.085.86-1.205.49
ZERO1.226.00-1.085.54-2.114.99
10UT0.185.91-2.005.06-2.934.33
22UT-1.085.54-3.024.24-3.773.33

NB: Positive numbers in the H column indicate the spindle is BELOW the top of the bracket. Conversely, negative numbers are ABOVE the top of the bracket.

*ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.
**ALLOW 3” BUMP CLEARANCE FROM FULL LOAD

Full Load Dimensions
Dimensions are for low profile, top mount only. Side mount is 18” higher. Allow 3” bump clearance from full load

No. 9 Bracket Dimensions

ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.

No. 9 Half Unit Bracket

ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.

Torflex No.10

TRAIL DEG.NO LOADFULL LOADSHOCK LOAD
HLHLHL
45DT5.734.243.795.542.665.88
32DT4.675.092.485.921.316.00
22DT3.795.541.496.000.325.88
10DT2.535.910.195.86-0.935.49
ZERO1.496.00-0.815.54-1.844.99
10UT0.455.91-1.735.06-2.664.33
22UT-0.815.54-2.754.24-3.503.33

NB: Positive numbers in the H column indicate the spindle is BELOW the top of the bracket. Conversely, negative numbers are ABOVE the top of the bracket.

*ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.
**ALLOW 3” BUMP CLEARANCE FROM FULL LOAD

Full Load Dimensions
Dimensions are for low profile, top mount only. Side mount is 18” higher. Allow 3” bump clearance from full load

No. 10 Bracket Dimensions

ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.

No. 10 Half Unit Bracket

ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.

Torflex No.11

TRAIL DEG.NO LOADFULL LOADSHOCK LOAD
HLHLHL
45DT6.014.244.075.542.945.88
32DT4.955.092.765.921.596.00
22DT4.075.541.776.000.615.88
10DT2.815.910.475.86-0.655.49
ZERO1.776.00-0.535.54-1.564.99
10UT0.735.91-1.455.06-2.384.33
22UT-0.535.54-2.474.24-3.223.33

NB: Positive numbers in the H column indicate the spindle is BELOW the top of the bracket. Conversely, negative numbers are ABOVE the top of the bracket.

*ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.
**ALLOW 3” BUMP CLEARANCE FROM FULL LOAD

Full Load Dimensions
Dimensions are for low profile, top mount only. Side mount is 18” higher. Allow 3” bump clearance from full load

No. 11 Bracket Dimensions

ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.

No. 11 Half Unit Bracket

ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.

Torflex No.12

TRAIL DEG.NO LOADFULL LOADSHOCK LOAD
HLHLHL
45DT6.244.244.305.543.175.88
32DT5.185.092.995.921.826.00
22DT4.305.542.006.000.835.88
10DT3.045.910.705.86-0.425.49
ZERO2.006.00-0.305.54-1.334.99
10UT0.965.91-1.225.06-2.154.33
22UT-0.305.54-2.244.24-2.993.33

NB: Positive numbers in the H column indicate the spindle is BELOW the top of the bracket. Conversely, negative numbers are ABOVE the top of the bracket.

*ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.
**ALLOW 3” BUMP CLEARANCE FROM FULL LOAD

Full Load Dimensions
Dimensions are for low profile, top mount only. Side mount is 18” higher. Allow 3” bump clearance from full load

No. 12 Bracket Dimensions

ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.

No. 12 Half Unit Bracket

ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.

Torflex No.13

TRAIL DEG.NO LOADFULL LOADSHOCK LOAD
HLHLHL
45DT6.494.244.555.543.425.88
32DT5.435.093.245.922.076.00
22DT4.555.542.256.001.085.88
10DT3.295.910.955.86-0.175.49
ZERO2.256.00-0.055.54-1.084.99
10UT1.215.91-0.975.06-1.904.33
22UT-0.055.54-1.994.24-2.743.33

NB: Positive numbers in the H column indicate the spindle is BELOW the top of the bracket. Conversely, negative numbers are ABOVE the top of the bracket.

*ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.
**ALLOW 3” BUMP CLEARANCE FROM FULL LOAD

Full Load Dimensions
Dimensions are for low profile, top mount only. Side mount is 18” higher. Allow 3” bump clearance from full load

No. 13 Bracket Dimensions

ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.

No. 13 Half Unit Bracket

ALL MEASUREMENTS ARE IN INCHES AND FOR LOW PROFILE, TOP MOUNT ONLY.